|Cylinder Number:||6||Ultrasonic Bath:||Build In|
|Fuel Flow:||4.5L/min||Input Power:||250W|
fuel injector cleaner tester machine,
ultrasonic injection cleaning equipment
Diagnostic Machine For All Cars Fuel Injector Tester And Cleaner Auto DiagnosticsTools
This product is applicable to diagnose and clean fuel injectors of various cars manufactured worldwide , improving stability , reliability and reducing pollution . It can perform automatic detecting , analyzing and cleaning .
a . Can do reverse flushing , flush-back cleaning , ultrasonic flushing , and disaffiliation-free
flushing to one or more fuel injectors.
b . Automatically simulate the overall process under various pulse width and engine speed. The operation status of the fuel injectors can also be observed whether at acceleration and
c . Can manually set time , pulse width and rotation speed of the fuel injector , and observe the performance under varied parameters. Ease and convenience of operation .
d . Can determine the shortest on-off cycle and the quality of the injector .
e . Can do oil circuit testing , and disaffiliation-free flushing to the engine .
|Ultrasonic cleaning||To perform simultaneous cleaning on several injectors and to remove the carbon deposits on the injector completely.|
|Uniformity/Sprayability test||To test the uniformity of injecting amount of each injector , and to monitor the spraying status of each injector with the help of backlight. This test is also for reverse flush.|
|Leakage test||To test the sealing and dribbling conditions of injectors under system pressure.|
|Injecting flow test||To check the injecting amount of the injector in 15 seconds of constant injection.|
|Auto. test||To test injectors by simulating different working conditions.|
|On-vehicle cleaning||The unit is equipped with various adaptors and couplers that facilitate cleaning on the injectors on vehicle.|
a . Power supply : AC220V/110V±10% , 50/60HZ
b . Input power : 250W
c . Ultrasonic cleaner power : 100W,25KHZ
d . Pulse width : 0-20ms , step 0.1ms
e . Injection time : 0-600 sec ,step 1sec
f . Oil pump pressure : 0-6.5kg/cm²
g . Fuel flow : 4.5L/min